abec 11 bearings
Abec 11 Bearings
Biltin Bearings are the first precision bearing designed for skateboarding by World Champion Skateboarder, Chris Chaput. They make your life faster and easier by integrating washers and spacers into every bearing. There is no frustration caused by dropping the washer or spacer in the dirt, searching for it; then once found, trying to get it perfectly clean so grit doesn't get into the assembly. Your locknuts can be tightened snuggly without pinching or binding the bearings.
They align themselves perfectly on the axle and in the wheel. As a result, your wheels spin faster and longer and with less vibration and friction. There is no rattle from misaligned bearings. Biltin's unique design helps to share the sideloads more evenly for longer wheel and bearing life. Biltins make wheel swapping a breeze and are easier to clean Abec 11 brand, Abec 7 rated bearings. Biltins have 1/2 a spacer 'built in' to eliminate the need for spacers, hence the name.... They also have tall outside inner shield so you don't need a speedring uder the nut. These bearings are especially good on trucks with short axles as they cover the thread more precisely. We now sell the bearings individually so that you can replace easily....but don't order 4 for your scooter, otherwise we will hunt you down like a dog....
Skateboard Bearings 11 specifications:
1) Shield / closure: Open bearing, Z, ZZ, RS, 2RS
2) Snap ring: N, NR
3) Tolerance codes: ABEC-1, ABEC-3, ABEC-5, ABEC-7
4) Vibration level codes: V4, V3, V2, V1
5) Internal clearance codes: C2, C3, C4, C5
6) Material: AISI52100, AISI440C, AISI304, AISI316, ceramic
7) Retainer: PTFE, nylon, PEEK or stainless steel
8) Bore size: 1 - 500mm
9) Model: 672-6709, 682-6820, 692-6920, 602-6020, 623-6220, 633-6320, 16000, MR52-
MR149, R
